ELECTRONIC CONVERSION LXKIT
FOR ALIGN TREX 700 NITRO SERIES HELICOPTERS
Item Number: AT700N-LXECK
Installation Diagram: CLICK HERE
Price: $698.95
Models: all ALIGN TREX 700N E-Conversion series.
Need Replacement Bearings? CLICK HERE
SAVE $32.50 when you purchase all of the 700N E-Conversion LXKit Series products together!
Check out the excellent build review on RCHeliResource.com by Tommy Larson: CLICK HERE
Note: the ALIGN TREX 700N Electronic Conversion LXKit is the pinnacle of the KDE Direct 700N E-Conversion Series;
producing a world-class, 90-size electric helicopter that is guaranteed to turn heads at any flight field. Included in the
LXKit is the high-efficiency, high-performance KDE Direct 1917H/1Y-N42 S2 brushless motor and high-strength power
transmission system that provides the longest flight times and greatest 3D flight capability on the market.
Flight performance testing utilized the Castle Creations HV brand of ESCs, running the latest v3.2 firmware. In
particular, the Castle Creations Phoenix ICE HV160 ESC was used for development and the following setup is
recommended for a powerful and efficient 3D setup:
LiPo Voltage: 12S (44.4V running voltage)
Gearing Ratio: 8.846 (115T/MOD1.0 Main Drive Gear and 13T/MOD1.0 Pinion Gear included)
-- Alternate 9.583 gearing ratio possible with optional 12T/MOD1.0 Pinion Gear
Governed Headspeed: 2000 to 2250 rpm
-- Warning: governor control must be enabled with the included gearing to prevent excessive headspeed --
Recommended Castle Creations ESC Settings:
Throttle Type: Governor Mode (Note: if using the "Set RPM" mode, Motor kV = 520 and Magnetic Poles = 8)
Governor Gain: Medium (25) to High (35)
Motor Timing: Low (0) to Normal (5)
PWM Rate: 16kHz
Includes:
- One (1) KDE 1917H/1Y-N42 S2 High Performance Brushless Motor, 520kV
- One (1) RevCo MOD1.0 Hardened Steel Pinion Gear, 6mm Bore, 13T
- One (1) TREX 700N E-Conversion Series Aluminum Bottom Bracket Upgrade
- Two (2) M4 x 0.7 x 20 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel)
- Four (4) M4 Flat Washers (Zinc-Plated Alloy Steel)
- Four (4) M3 Flat Washers (Zinc-Plated Alloy Steel)
- Four (4) M3 x 0.5 Nylon-Insert Locknuts (Zinc-Plated Class 8 Alloy Steel)
- One (1) TREX 700N E-Conversion Series Aluminum Electronic Pinion Support, M4 x 30mm
- One (1) TREX 700N E-Conversion Pinion Support Shaft Component (Precision-Ground SS 416)
- One (1) Radial Ball Bearing 6 x 17 x 6 mm
- One (1) Radial Ball Bearing 6 x 12 x 4 mm
- Three (3) M4 x 0.7 x 40 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel)
- One (1) E-Style Retaining Ring 6 mm (BP Alloy Steel)
- One (1) TREX 700 Series Aluminum Elevator Servo Mount
- Four (4) M2.5 x 0.45 x 10 mm Button Head Socket Head Cap Screws (Class 12.9 BP Alloy Steel)
- Four (4) M2.5 x 0.45 x 14 mm Button Head Socket Head Cap Screws (Class 12.9 BP Alloy Steel)
- One (1) TREX 700N E-Conversion Series Aluminum Motor Mount Upgrade, M4 x 30mm
- Four (4) M4 x 0.7 x 10 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel)
- Four (4) M4 Flat Washers (Zinc-Plated Alloy Steel)
- One (1) TREX 550/600/700 Series Aluminum Performance Tail Upgrade V2 Assembly
- Two (2) TREX 550/600/700 Series Aluminum Tail Control Link V2 Upgrades
- Two (2) Radial Ball Bearings 3 x 10 x 4 mm
- Four (4) Flanged Radial Ball Bearings 2 x 5 x 2.5 mm
- Two (2) M3 x 0.4 x 12 mm Button Head Socket Head Cap Screws (Class 12.9 BP Alloy Steel)
- Two (2) M2 x 0.4 x 8 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel)
- Two (2) M3 Flat Washers (Zinc-Plated Alloy Steel)
- One (1) TREX 700N E-Conversion Series Aluminum Receiver Mount Upgrade
- Eight (8) M2.5 x 0.45 x 14 mm Button Head Socket Head Cap Screws (Class 12.9 BP Alloy Steel)
- Two (2) TREX 700N/E-Conversion Series Aluminum Thrusted Metal Bearing Blocks
- Two (2) Radial Ball Bearings 12 x 24 x 6 mm
- Two (2) Thrust Ball Bearings 12 x 23 x 7.5 mm
- Two (2) Round Hole Shims 12.1 x 16 x 1 mm
- One (1) TREX 550/600/700 Series Aluminum Vertical Stabilizer Mount
- One (1) TREX 700 Series Main Drive Gear, 115T, MOD1.0
Full Page Descriptions:
KDE Direct 1917H/1Y-N42 S2 High Performance Brushless Motor, 520kV
RevCo MOD1.0 Hardened Steel Pinion Gear, 6mm Bore, 13T
TREX 700N E-Conversion Series Aluminum Bottom Bracket Upgrade
TREX 700N E-Conversion Series Aluminum Electronic Pinion Support, M4 x 30mm
TREX 700 Series Aluminum Elevator Servo Mount
TREX 700N E-Conversion Series Aluminum Motor Mount Upgrade, M4 x 30mm
TREX 550/600/700 Series Aluminum Performance Tail Upgrade V2 Assembly
TREX 700N E-Conversion Series Aluminum Receiver Mount Upgrade
TREX 700N/E-Conversion Series Aluminum Thrusted Metal Bearing Blocks
TREX 550/600/700 Series Aluminum Vertical Stabilizer Mount
TREX 700 Series Main Drive Gear, 115T, MOD1.0
Receive FREE USPS Priority Domestic or USPS First Class International Shipping with total
purchase of $99 or over! Need if faster? Select an alternate method after Checkout or e-mail us
for an alternate carrier and rates at sales@kdedirect.com.
To Purchase: Click the Add to Cart link located above (it will direct you automatically to PayPal).
Payment Methods: We currently accept all payments through PayPal, Money Orders, or Personal
Check. Please note credit cards are accepted through PayPal by clicking the Add to Cart link
located on this page and paying after Checkout. If you would prefer sending Money Order* or
Personal Check*, please contact our sales team at the e-mail above for details.
*Your check or money order will need to clear before products are shipped.
FOR ALIGN TREX 700 NITRO SERIES HELICOPTERS
Item Number: AT700N-LXECK
Installation Diagram: CLICK HERE
Price: $698.95
Models: all ALIGN TREX 700N E-Conversion series.
Need Replacement Bearings? CLICK HERE
SAVE $32.50 when you purchase all of the 700N E-Conversion LXKit Series products together!
Check out the excellent build review on RCHeliResource.com by Tommy Larson: CLICK HERE
Note: the ALIGN TREX 700N Electronic Conversion LXKit is the pinnacle of the KDE Direct 700N E-Conversion Series;
producing a world-class, 90-size electric helicopter that is guaranteed to turn heads at any flight field. Included in the
LXKit is the high-efficiency, high-performance KDE Direct 1917H/1Y-N42 S2 brushless motor and high-strength power
transmission system that provides the longest flight times and greatest 3D flight capability on the market.
Flight performance testing utilized the Castle Creations HV brand of ESCs, running the latest v3.2 firmware. In
particular, the Castle Creations Phoenix ICE HV160 ESC was used for development and the following setup is
recommended for a powerful and efficient 3D setup:
LiPo Voltage: 12S (44.4V running voltage)
Gearing Ratio: 8.846 (115T/MOD1.0 Main Drive Gear and 13T/MOD1.0 Pinion Gear included)
-- Alternate 9.583 gearing ratio possible with optional 12T/MOD1.0 Pinion Gear
Governed Headspeed: 2000 to 2250 rpm
-- Warning: governor control must be enabled with the included gearing to prevent excessive headspeed --
Recommended Castle Creations ESC Settings:
Throttle Type: Governor Mode (Note: if using the "Set RPM" mode, Motor kV = 520 and Magnetic Poles = 8)
Governor Gain: Medium (25) to High (35)
Motor Timing: Low (0) to Normal (5)
PWM Rate: 16kHz
Includes:
- One (1) KDE 1917H/1Y-N42 S2 High Performance Brushless Motor, 520kV
- One (1) RevCo MOD1.0 Hardened Steel Pinion Gear, 6mm Bore, 13T
- One (1) TREX 700N E-Conversion Series Aluminum Bottom Bracket Upgrade
- Two (2) M4 x 0.7 x 20 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel)
- Four (4) M4 Flat Washers (Zinc-Plated Alloy Steel)
- Four (4) M3 Flat Washers (Zinc-Plated Alloy Steel)
- Four (4) M3 x 0.5 Nylon-Insert Locknuts (Zinc-Plated Class 8 Alloy Steel)
- One (1) TREX 700N E-Conversion Series Aluminum Electronic Pinion Support, M4 x 30mm
- One (1) TREX 700N E-Conversion Pinion Support Shaft Component (Precision-Ground SS 416)
- One (1) Radial Ball Bearing 6 x 17 x 6 mm
- One (1) Radial Ball Bearing 6 x 12 x 4 mm
- Three (3) M4 x 0.7 x 40 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel)
- One (1) E-Style Retaining Ring 6 mm (BP Alloy Steel)
- One (1) TREX 700 Series Aluminum Elevator Servo Mount
- Four (4) M2.5 x 0.45 x 10 mm Button Head Socket Head Cap Screws (Class 12.9 BP Alloy Steel)
- Four (4) M2.5 x 0.45 x 14 mm Button Head Socket Head Cap Screws (Class 12.9 BP Alloy Steel)
- One (1) TREX 700N E-Conversion Series Aluminum Motor Mount Upgrade, M4 x 30mm
- Four (4) M4 x 0.7 x 10 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel)
- Four (4) M4 Flat Washers (Zinc-Plated Alloy Steel)
- One (1) TREX 550/600/700 Series Aluminum Performance Tail Upgrade V2 Assembly
- Two (2) TREX 550/600/700 Series Aluminum Tail Control Link V2 Upgrades
- Two (2) Radial Ball Bearings 3 x 10 x 4 mm
- Four (4) Flanged Radial Ball Bearings 2 x 5 x 2.5 mm
- Two (2) M3 x 0.4 x 12 mm Button Head Socket Head Cap Screws (Class 12.9 BP Alloy Steel)
- Two (2) M2 x 0.4 x 8 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel)
- Two (2) M3 Flat Washers (Zinc-Plated Alloy Steel)
- One (1) TREX 700N E-Conversion Series Aluminum Receiver Mount Upgrade
- Eight (8) M2.5 x 0.45 x 14 mm Button Head Socket Head Cap Screws (Class 12.9 BP Alloy Steel)
- Two (2) TREX 700N/E-Conversion Series Aluminum Thrusted Metal Bearing Blocks
- Two (2) Radial Ball Bearings 12 x 24 x 6 mm
- Two (2) Thrust Ball Bearings 12 x 23 x 7.5 mm
- Two (2) Round Hole Shims 12.1 x 16 x 1 mm
- One (1) TREX 550/600/700 Series Aluminum Vertical Stabilizer Mount
- One (1) TREX 700 Series Main Drive Gear, 115T, MOD1.0
Full Page Descriptions:
KDE Direct 1917H/1Y-N42 S2 High Performance Brushless Motor, 520kV
RevCo MOD1.0 Hardened Steel Pinion Gear, 6mm Bore, 13T
TREX 700N E-Conversion Series Aluminum Bottom Bracket Upgrade
TREX 700N E-Conversion Series Aluminum Electronic Pinion Support, M4 x 30mm
TREX 700 Series Aluminum Elevator Servo Mount
TREX 700N E-Conversion Series Aluminum Motor Mount Upgrade, M4 x 30mm
TREX 550/600/700 Series Aluminum Performance Tail Upgrade V2 Assembly
TREX 700N E-Conversion Series Aluminum Receiver Mount Upgrade
TREX 700N/E-Conversion Series Aluminum Thrusted Metal Bearing Blocks
TREX 550/600/700 Series Aluminum Vertical Stabilizer Mount
TREX 700 Series Main Drive Gear, 115T, MOD1.0
Receive FREE USPS Priority Domestic or USPS First Class International Shipping with total
purchase of $99 or over! Need if faster? Select an alternate method after Checkout or e-mail us
for an alternate carrier and rates at sales@kdedirect.com.
To Purchase: Click the Add to Cart link located above (it will direct you automatically to PayPal).
Payment Methods: We currently accept all payments through PayPal, Money Orders, or Personal
Check. Please note credit cards are accepted through PayPal by clicking the Add to Cart link
located on this page and paying after Checkout. If you would prefer sending Money Order* or
Personal Check*, please contact our sales team at the e-mail above for details.
*Your check or money order will need to clear before products are shipped.
