"Damn these are nice! I just got the thrust bearing blocks for the 700 and they are very cool,
some of the nicest stuff I've seen! Thanks Patrick!"
"Love your stuff, thanks for all the hard work!"
"Yes, I love products of KDE."
"Just received 3 sets of 500 blocks from Kegerator. They are awesome. I´ll put them together
and install them in my rexes tonight. BTW: on my kitchen scale they weight 18 grams.....but
does it really matter? Do you guys fly that thing that good that you can tell the difference of a
few grams???????? Once again many thanks to KDE Direct and Leslie for the outstanding
product and service."
"They fit perfectly (as do all the other KDE products) with no bearing play whatsoever. Perfect
fit into the frames as well."
"I installed KDE bottom plate, battery plate and ANTI-ROTATION BRACKET. My parts fit perfect.
Main bearing block in the mail...Very high quality and good fit on my parts"
"I have used the thrusted bearing blocks for a few weeks and the quality is very very good. I
have all the other KDE upgrades and they fit well."
"I've also bought the entire KDE upgrade package and didn't notice any problems with the
completed build. Hell I must say with these upgrades the looks are just bad a$$."
"VERY NICE looking and well thought out upgrade from KDE"
"The stock radial bearings in the TREX 700 don't last very long, even when you don't crash.
Hard 3D flying brinnels the bearings from all the axial loads we put on them from all the
collective pumping we do these days. Finally, we can beat our 700's to death and not worry
about destroying our radial bearings since the thrust bearings will take all the axial loads.
Thanks KDE Direct for coming out with another important upgrade for our heli's. Oh, and by
the way, your frame braces saved my my TREX 500 again this week. I have not broken my
carbon fiber frames since I put on your lower frame brace and battery mount."
"Anyway, I received this item and it is beautifully machined. Probably the best finishing on any
aftermarket part that I've bought. Looks like it may have spent some time in a ball mill or similar
treatment followed by a clear anodize. Very nice."
"I just put some of the KDE Direct thrust bearing blocks in my 700's over the weekend. They fit
perfectly, I was able to use the same main shaft spacer as the original bearing blocks. The
radial bearings fit just right in the bearing blocks, just a nice slip fit. Huge upgrade for any TREX
700. Thanks KDE Direct"
"Oh man that is cool stuff, going to have to get those on order. Love all of the KDE stuff we
support it all and the quality on everything he makes is impeccable. Definitely wanna try these
too."
"I ordered mine from the KDE Direct website and they arrived to Finland in 6 days. Really a
pleasure to install parts made with such great precision. Also got very good customer service
from KDE. Thumbs up!"
"I was very tired of replacing the main shaft bearings in my 700's. Even if you don't crash the
main shaft bearings get notchy. Lots of collective pumping with 8717 servos must put massive
loads into the bearings. I just bought some KDE Direct main shaft bearing blocks that have
thrust bearings built in. Finally, no more notchy bearings and they fit perfectly in my 700's."
"Thanks for the making the new 700 bearing blocks, they work great. Everything is very high
quality. The bearings fit perfectly in the blocks. I own three TREX 700's, two set up as nitro and
one electric. I bought one set from you and they worked so well that I ordered another two sets
for the others. Thanks for making so many good upgrades. Keep them coming."
"Just installed these we will see how they are. I sure am impressed with the tolerances and
quality, I used green threadlock on the radial bearing as I would prefer. It went together so
easily. The installation manual on the kdedirect.com is very easy to understand."
"I have just received my package! I just wanted to thank you for the fast shipping and the very
best quality of your product ."
"I ordered from ReadyHeli the other day!!!!! Can’t wait...also when is the receiver tray coming
out for the 600 ESP? Everybody loves the bottom plate for the 600..."
"I received the plate today! It’s awesome…. I love it! Fits the ESP Kit Perrrrrrfectly!!"
"Just an FYI...I made my maiden flight with the new ESP this weekend. Everyone was loving the
bottom plate!!!!! So expect some sales from the good old state of Georgia!!!!!! Thanks again
and look forward to seeing future parts from you guys the quality is outstanding!!!!!!"
"OK, I bit and bought one. I have the bottom plate as well. In combination with metal bearing
blocks it makes for a very sound installation. I had a very hard auto landing after the tail rotor
went out and only broke the landing gear. Not major damage. When does the RX plate come
out as well???"
"Yes it's the my second KDE Upgrade and it's for two reasons: the first is because I was happy
with the quality of your products...this part gives a fantastic aspect to my Heli :) and the second
reason is because I crashed my Heli last weekend and when I saw the benefit of this upgrade
(the damages could be more important)...it's not possible for me to flight without. :)"
"Just received mine and I can honestly say that this is some of the finest machining I've ever
seen for Heli Parts. Provides rigidity and strength beyond what I'd expected. Nice homegrown
American quality. I have a similar piece for my 450 from a Japanese mfg and there is no
comparison in quality of material or craftsmanship. Getting one for the 600 next. Thanks for
making these upgrades available and I look forward to your future projects."
some of the nicest stuff I've seen! Thanks Patrick!"
"Love your stuff, thanks for all the hard work!"
"Yes, I love products of KDE."
"Just received 3 sets of 500 blocks from Kegerator. They are awesome. I´ll put them together
and install them in my rexes tonight. BTW: on my kitchen scale they weight 18 grams.....but
does it really matter? Do you guys fly that thing that good that you can tell the difference of a
few grams???????? Once again many thanks to KDE Direct and Leslie for the outstanding
product and service."
"They fit perfectly (as do all the other KDE products) with no bearing play whatsoever. Perfect
fit into the frames as well."
"I installed KDE bottom plate, battery plate and ANTI-ROTATION BRACKET. My parts fit perfect.
Main bearing block in the mail...Very high quality and good fit on my parts"
"I have used the thrusted bearing blocks for a few weeks and the quality is very very good. I
have all the other KDE upgrades and they fit well."
"I've also bought the entire KDE upgrade package and didn't notice any problems with the
completed build. Hell I must say with these upgrades the looks are just bad a$$."
"VERY NICE looking and well thought out upgrade from KDE"
"The stock radial bearings in the TREX 700 don't last very long, even when you don't crash.
Hard 3D flying brinnels the bearings from all the axial loads we put on them from all the
collective pumping we do these days. Finally, we can beat our 700's to death and not worry
about destroying our radial bearings since the thrust bearings will take all the axial loads.
Thanks KDE Direct for coming out with another important upgrade for our heli's. Oh, and by
the way, your frame braces saved my my TREX 500 again this week. I have not broken my
carbon fiber frames since I put on your lower frame brace and battery mount."
"Anyway, I received this item and it is beautifully machined. Probably the best finishing on any
aftermarket part that I've bought. Looks like it may have spent some time in a ball mill or similar
treatment followed by a clear anodize. Very nice."
"I just put some of the KDE Direct thrust bearing blocks in my 700's over the weekend. They fit
perfectly, I was able to use the same main shaft spacer as the original bearing blocks. The
radial bearings fit just right in the bearing blocks, just a nice slip fit. Huge upgrade for any TREX
700. Thanks KDE Direct"
"Oh man that is cool stuff, going to have to get those on order. Love all of the KDE stuff we
support it all and the quality on everything he makes is impeccable. Definitely wanna try these
too."
"I ordered mine from the KDE Direct website and they arrived to Finland in 6 days. Really a
pleasure to install parts made with such great precision. Also got very good customer service
from KDE. Thumbs up!"
"I was very tired of replacing the main shaft bearings in my 700's. Even if you don't crash the
main shaft bearings get notchy. Lots of collective pumping with 8717 servos must put massive
loads into the bearings. I just bought some KDE Direct main shaft bearing blocks that have
thrust bearings built in. Finally, no more notchy bearings and they fit perfectly in my 700's."
"Thanks for the making the new 700 bearing blocks, they work great. Everything is very high
quality. The bearings fit perfectly in the blocks. I own three TREX 700's, two set up as nitro and
one electric. I bought one set from you and they worked so well that I ordered another two sets
for the others. Thanks for making so many good upgrades. Keep them coming."
"Just installed these we will see how they are. I sure am impressed with the tolerances and
quality, I used green threadlock on the radial bearing as I would prefer. It went together so
easily. The installation manual on the kdedirect.com is very easy to understand."
"I have just received my package! I just wanted to thank you for the fast shipping and the very
best quality of your product ."
"I ordered from ReadyHeli the other day!!!!! Can’t wait...also when is the receiver tray coming
out for the 600 ESP? Everybody loves the bottom plate for the 600..."
"I received the plate today! It’s awesome…. I love it! Fits the ESP Kit Perrrrrrfectly!!"
"Just an FYI...I made my maiden flight with the new ESP this weekend. Everyone was loving the
bottom plate!!!!! So expect some sales from the good old state of Georgia!!!!!! Thanks again
and look forward to seeing future parts from you guys the quality is outstanding!!!!!!"
"OK, I bit and bought one. I have the bottom plate as well. In combination with metal bearing
blocks it makes for a very sound installation. I had a very hard auto landing after the tail rotor
went out and only broke the landing gear. Not major damage. When does the RX plate come
out as well???"
"Yes it's the my second KDE Upgrade and it's for two reasons: the first is because I was happy
with the quality of your products...this part gives a fantastic aspect to my Heli :) and the second
reason is because I crashed my Heli last weekend and when I saw the benefit of this upgrade
(the damages could be more important)...it's not possible for me to flight without. :)"
"Just received mine and I can honestly say that this is some of the finest machining I've ever
seen for Heli Parts. Provides rigidity and strength beyond what I'd expected. Nice homegrown
American quality. I have a similar piece for my 450 from a Japanese mfg and there is no
comparison in quality of material or craftsmanship. Getting one for the 600 next. Thanks for
making these upgrades available and I look forward to your future projects."
CLICK ON IMAGE FOR DIRECT VIDEO LINK (.wmv)
FEEDBACK FROM KDE DIRECT CUSTOMERS
| Video Reviews |
