SG630/700/770-PTC-V2

Performance Tail Control V2 for SAB Heli Division Goblin 630/700/770 Series Helicopters

Product has been archived, and is no longer available for purchase. This page is for reference only.


ENGINEERING THE UNSEEN



Overview

The KDE Direct SAB Goblin Series Performance Tail Control V2 assembly is the ultimate, slop-free control system available on the market to provide precise tail control and authority. Add the upgrade to the tail control system and you now have a complete, dual-radial ball bearing supported assembly throughout for the ultimate flight characteristics. With the mechanics of the dual-fork supported tail slider, there is no worry of abnormal wear or torque loads on the tail shaft slider for a continuously smooth, failure-free operation even under the hardest and most extreme flying conditions.

Important: Due to the precision CNC-machining of each component, correct installation is key for proper, bind-free operation. Please pay attention to the Installation Instructions and installation video, take your time during the install, and make sure to apply medium-strength Loctite (Blue 243 or equivalent) to all screws during assembly. Once fully-installed, a significant reduction in slop throughout the tail mechanics will be clearly evident on the bench and in actual flight.

Specifications

Material: Aluminum 6061-T6

Models: All SAB Heli Division Goblin 630, 650, 700, 770, SPEED, and URUKAY series. Assembly replaces components of the SAB Tail Rotor Control mechanism for unparalleled precision and authority.

Includes:

  • One (1) Goblin 630/700/770 Series Performance Tail Control Mounting Bolt V2
  • One (1) Goblin 630/700/770 Series Performance Tail Control Secondary Link
  • One (1) Goblin 630/700/770 Series Performance Tail Control Primary Link
  • One (1) Goblin 630/700/770 Series Performance Tail Control Arm Lever
  • One (1) Goblin 630/700/770 Series Performance Tail Control Bearing Holder
  • One (1) Goblin 630/700/770 Series Performance Tail Control Bearing Collar
  • Two (2) Radial Ball Bearings 8 x 12 x 3.5 mm
  • Six (6) Flanged Radial Ball Bearings 3 x 7 x 3 mm
  • Seven (7) M3 x 0.5 x 6 mm Button Head Socket Head Cap Screws (Class 12.9)
  • Two (2) M2.5 x 0.45 x 6mm Socket Head Cap Screws (Class 12.9)

Finish: Clear anodize, mirror-polish CNC gloss

Weight: 11 g (design is FEA optimized for maximum strength and minimum weight)

Manuals


We Also Recommend