700 NITRO ELECTRONIC CONVERSION KIT
FOR ALIGN TREX 700 NITRO SERIES HELICOPTERS
Item Number: AT700N-ECK325/425/430
Installation Diagram: CLICK HERE
Price: $181.95
Models: all ALIGN TREX 700N E-Conversion series. Choose the appropriate Motor Mount Upgrade
version for your motor of choice with the pull-down menu above.
SAVE $12.90 when you purchase all of the 700N E-Conversion Kit Series products together!
Recommended Accessories:
KDE DIRECT 700XF-495 HP BRUSHLESS MOTOR, 495Kv
REVCO MOD1.0 HARDENED STEEL PINION GEAR, 6MM BORE
TREX 700N E-CONVERSION SERIES ALUMINUM ELECTRONIC PINION SUPPORT
TREX 700 SERIES MAIN DRIVE GEAR, 115T, MOD1.0, HD
Note: the ALIGN TREX 700N Electronic Conversion Kit is composed of three Aluminum upgrade designs that converts the
Nitro helicopter frame structure into a true 90-class electric. With a high-CG, front Receiver Mount Upgrade and a
high-strength, FEA-engineered Bottom Bracket Upgrade with easy to install LiPo locations; the new KDE Direct design will
provide the best setup for hardcore 3D with maintained stability for F3C competition and smooth flying. Add to this a
four-bolt, brushless motor mount to prevent any flex with the new high power setups available today, the upgrade kit will
bring the TREX 700N into the future of 90-class electric helicopters.
Three motor mount sizes are available, covering the vast majority of motors on the market. Although there are slight
variations between brands, the most common 90-class motors are listed below:
M3 x 25 mm: Scorpion HK-40XX series, XERA 40XX series, Hacker Brushless Turbine series
M4 x 25 mm: NEU 19XXH series
M4 x 30 mm: ALIGN 700MX series, KDE Direct 700XF series, Kontronik Pyro700 series
Includes:
- One (1) TREX 700N E-Conversion Series Aluminum Bottom Bracket Upgrade
- Two (2) M4 x 0.7 x 20 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel)
- Four (4) M4 Flat Washers (Zinc-Plated Alloy Steel)
- Four (4) M3 Flat Washers (Zinc-Plated Alloy Steel)
- Four (4) M3 x 0.5 Nylon-Insert Locknuts (Zinc-Plated Class 8 Alloy Steel)
- One (1) TREX 700N E-Conversion Series Aluminum Motor Mount Upgrade
M3 x 25 mm Version Includes:
- Four (4) M3 x 0.5 x 10 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel)
- Four (4) M3 Flat Washers (Zinc-Plated Alloy Steel)
M4 x 25 mm Version Includes:
- Four (4) M4 x 0.7 x 10 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel)
- Four (4) M4 Flat Washers (Zinc-Plated Alloy Steel)
M4 x 30 mm Version includes:
- Four (4) M4 x 0.7 x 10 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel)
- Four (4) M4 Flat Washers (Zinc-Plated Alloy Steel)
- One (1) TREX 700N E-Conversion Series Aluminum Receiver Mount Upgrade
- Eight (8) M2.5 x 0.45 x 14 mm Button Head Socket Head Cap Screws (Class 12.9 BP Alloy Steel)
Finish:
Clear anodize, mirror-polish CNC gloss
Weight:
Total Weight: 262 g (No power system included)
Weight Comparison Against Original Nitro Setup: CLICK HERE
Full Page Descriptions:
TREX 700N E-Conversion Series Aluminum Bottom Bracket Upgrade
TREX 700N E-Conversion Series Aluminum Motor Mount Upgrade
TREX 700N E-Conversion Series Aluminum Receiver Mount Upgrade
Receive FREE USPS Priority Domestic or USPS First Class International Shipping with total
purchase of $99 or over! Need if faster? Select an alternate method after Checkout or e-mail us for
an alternate carrier and rates at sales@kdedirect.com.
To Purchase: Click the Add to Cart link located above (it will direct you automatically to PayPal).
Payment Methods: We currently accept all payments through PayPal, Money Orders, or Personal
Check. Please note credit cards are accepted through PayPal by clicking the Add to Cart link located
on this page and paying after Checkout. If you would prefer sending Money Order* or Personal Check*,
please contact our sales team at the e-mail above for details.
*Your check or money order will need to clear before products are shipped.
FOR ALIGN TREX 700 NITRO SERIES HELICOPTERS
Item Number: AT700N-ECK325/425/430
Installation Diagram: CLICK HERE
Price: $181.95
Models: all ALIGN TREX 700N E-Conversion series. Choose the appropriate Motor Mount Upgrade
version for your motor of choice with the pull-down menu above.
SAVE $12.90 when you purchase all of the 700N E-Conversion Kit Series products together!
Recommended Accessories:
KDE DIRECT 700XF-495 HP BRUSHLESS MOTOR, 495Kv
REVCO MOD1.0 HARDENED STEEL PINION GEAR, 6MM BORE
TREX 700N E-CONVERSION SERIES ALUMINUM ELECTRONIC PINION SUPPORT
TREX 700 SERIES MAIN DRIVE GEAR, 115T, MOD1.0, HD
Note: the ALIGN TREX 700N Electronic Conversion Kit is composed of three Aluminum upgrade designs that converts the
Nitro helicopter frame structure into a true 90-class electric. With a high-CG, front Receiver Mount Upgrade and a
high-strength, FEA-engineered Bottom Bracket Upgrade with easy to install LiPo locations; the new KDE Direct design will
provide the best setup for hardcore 3D with maintained stability for F3C competition and smooth flying. Add to this a
four-bolt, brushless motor mount to prevent any flex with the new high power setups available today, the upgrade kit will
bring the TREX 700N into the future of 90-class electric helicopters.
Three motor mount sizes are available, covering the vast majority of motors on the market. Although there are slight
variations between brands, the most common 90-class motors are listed below:
M3 x 25 mm: Scorpion HK-40XX series, XERA 40XX series, Hacker Brushless Turbine series
M4 x 25 mm: NEU 19XXH series
M4 x 30 mm: ALIGN 700MX series, KDE Direct 700XF series, Kontronik Pyro700 series
Includes:
- One (1) TREX 700N E-Conversion Series Aluminum Bottom Bracket Upgrade
- Two (2) M4 x 0.7 x 20 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel)
- Four (4) M4 Flat Washers (Zinc-Plated Alloy Steel)
- Four (4) M3 Flat Washers (Zinc-Plated Alloy Steel)
- Four (4) M3 x 0.5 Nylon-Insert Locknuts (Zinc-Plated Class 8 Alloy Steel)
- One (1) TREX 700N E-Conversion Series Aluminum Motor Mount Upgrade
M3 x 25 mm Version Includes:
- Four (4) M3 x 0.5 x 10 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel)
- Four (4) M3 Flat Washers (Zinc-Plated Alloy Steel)
M4 x 25 mm Version Includes:
- Four (4) M4 x 0.7 x 10 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel)
- Four (4) M4 Flat Washers (Zinc-Plated Alloy Steel)
M4 x 30 mm Version includes:
- Four (4) M4 x 0.7 x 10 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel)
- Four (4) M4 Flat Washers (Zinc-Plated Alloy Steel)
- One (1) TREX 700N E-Conversion Series Aluminum Receiver Mount Upgrade
- Eight (8) M2.5 x 0.45 x 14 mm Button Head Socket Head Cap Screws (Class 12.9 BP Alloy Steel)
Finish:
Clear anodize, mirror-polish CNC gloss
Weight:
Total Weight: 262 g (No power system included)
Weight Comparison Against Original Nitro Setup: CLICK HERE
Full Page Descriptions:
TREX 700N E-Conversion Series Aluminum Bottom Bracket Upgrade
TREX 700N E-Conversion Series Aluminum Motor Mount Upgrade
TREX 700N E-Conversion Series Aluminum Receiver Mount Upgrade
Receive FREE USPS Priority Domestic or USPS First Class International Shipping with total
purchase of $99 or over! Need if faster? Select an alternate method after Checkout or e-mail us for
an alternate carrier and rates at sales@kdedirect.com.
To Purchase: Click the Add to Cart link located above (it will direct you automatically to PayPal).
Payment Methods: We currently accept all payments through PayPal, Money Orders, or Personal
Check. Please note credit cards are accepted through PayPal by clicking the Add to Cart link located
on this page and paying after Checkout. If you would prefer sending Money Order* or Personal Check*,
please contact our sales team at the e-mail above for details.
*Your check or money order will need to clear before products are shipped.
